Part of the data ring
TireFit
Size sheet · one designationOutside the usual envelope

335/45R13
tyre size, drawn to scale

The dimensions

Size elevation 335/45R13 · SCALE 1:3
OVERALL Ø 632 mm / 24.87″ RIM 13″ = 330.2 mm SECTION 335 MM / 13.19″ SIDEWALL 151 mm 45% OF 335 MM 335/45R13

SOURCE·Metric size geometry + UN ECE R39 speedometer tolerance·drawn to scale from the size designation — 1 px = 2.87 mm·REVIEWED ETRTO STANDARD

632 mm A 335/45R13 stands 632 mm — 24.87″ — from the ground to the top of the tread, on a sidewall of 150.8 mm.

Every one of those figures comes out of the designation itself: 335 mm across, a sidewall 45% of that, beaded onto a 13-inch wheel. It turns 504 times per kilometre, which is the number your speedometer and ABS are really counting.

Overall diameter
632mm · 24.87″
Sidewall height
150.8mm
Section width
335mm · 13.19″
Revolutions / km
504· 811/mi

How the figures are derived

  1. Read the size as the specification it is: section width in millimetres, aspect ratio as a percentage of that width, rim diameter in inches.
  2. Sidewall height = width × aspect ÷ 100. This is the number the size string is really about, and it is the one nobody quotes.
  3. Overall diameter = rim × 25.4 + two sidewalls — one at the top of the wheel and one at the bottom.
  4. Circumference = π × overall diameter, which gives revolutions per kilometre and per mile directly.
  5. Nothing above is measured, estimated, averaged or dated. It is the definition of the designation, so it does not go stale and it has no source to cite beyond the standard itself.
sidewall (mm) = width × aspect ÷ 100
overall diameter (mm) = rim × 25.4 + 2 × sidewall
speedo true speed = indicated × (new diameter ÷ old diameter)

The full method, the ±3% rule, and what geometry cannot tell you →

What the three numbers actually say

The size on your sidewall is a specification, and each field of it means one thing.

335
Section width, 335 millimetres. The tyre's width at its widest point when it is mounted and inflated — sidewall bulge included, not the tread. In inches that is 13.19″.
45
Aspect ratio, 45%. The sidewall is 45% as tall as the tyre is wide, so 335 × 45 ÷ 100 = 150.8 mm. A lower number is a shorter sidewall and a stiffer ride.
R13
Radial construction, 13-inch rim. The R is the carcass type, not a size. The 13 is the wheel diameter the tyre beads onto — 330.2 mm — and it is the one dimension of the three that is still in inches.

The load index and speed symbol that follow the size — the 91V part — are a separate code. Read the rest of the sidewall →

Full dimensions

Overall diameter631.7 mm24.87″
Sidewall height150.8 mm5.94″
Section width335 mm13.19″
Rim diameter13″330.2 mm
Rolling circumference1985 mm1.985 m
Revolutions per kilometre503.9810.9 per mile
Ride height contribution315.9 mmhub centre to ground, unloaded

SOURCE·Metric size geometry + UN ECE R39 speedometer tolerance·computed from the 335/45R13 designation — no catalogue, no measurement, no vintage·REVIEWED ETRTO STANDARD

335/45R13 — the questions that follow

What is the overall diameter of a 335/45R13 tyre?

632 mm, or 24.87″. That is the 13-inch rim (330.2 mm) plus two sidewalls of 150.8 mm each — one above the wheel centre and one below.

How tall is the sidewall on a 335/45R13?

150.8 mm. The 45 in the size is a percentage, not a measurement: the sidewall is 45% of the 335 mm section width, so 335 × 45 ÷ 100 = 150.8 mm.

What can I fit instead of a 335/45R13?

This size sits at the edge of the conventional fitment envelope, so there are no close alternatives inside the ±3% band on this rim. Check your vehicle's tyre placard before considering anything wider or taller.

How many times does a 335/45R13 turn in a kilometre?

504 revolutions per kilometre, or 811 per mile. Its rolling circumference is 1.985 m, which is what the speedometer and the ABS both count against.

The geometry here is exact; whether a tyre fits YOUR car is not something geometry can answer. Arch clearance, suspension travel, offset, load rating and your vehicle's own placard all decide that, and none of them are in a size string. The ±3% rule quoted throughout is an industry convention, not a law. Confirm any change against the tyre placard on your door pillar and with a tyre fitter before you buy.

See all 10 sites in this family, with what each one answers

Published by

Amit Sharma

Auckland real-estate agent and marketer. Builds free, sourced data tools.