175/70R13
tyre size, drawn to scale
The dimensions
SOURCE·Metric size geometry + UN ECE R39 speedometer tolerance·drawn to scale from the size designation — 1 px = 2.87 mm·REVIEWED ETRTO STANDARD
575 mm A 175/70R13 stands 575 mm — 22.65″ — from the ground to the top of the tread, on a sidewall of 122.5 mm.
Every one of those figures comes out of the designation itself: 175 mm across, a sidewall 70% of that, beaded onto a 13-inch wheel. It turns 553 times per kilometre, which is the number your speedometer and ABS are really counting.
- Overall diameter
- 575mm · 22.65″
- Sidewall height
- 122.5mm
- Section width
- 175mm · 6.89″
- Revolutions / km
- 553· 891/mi
How the figures are derived
- Read the size as the specification it is: section width in millimetres, aspect ratio as a percentage of that width, rim diameter in inches.
- Sidewall height = width × aspect ÷ 100. This is the number the size string is really about, and it is the one nobody quotes.
- Overall diameter = rim × 25.4 + two sidewalls — one at the top of the wheel and one at the bottom.
- Circumference = π × overall diameter, which gives revolutions per kilometre and per mile directly.
- Nothing above is measured, estimated, averaged or dated. It is the definition of the designation, so it does not go stale and it has no source to cite beyond the standard itself.
sidewall (mm) = width × aspect ÷ 100 overall diameter (mm) = rim × 25.4 + 2 × sidewall speedo true speed = indicated × (new diameter ÷ old diameter)
The full method, the ±3% rule, and what geometry cannot tell you →
What the three numbers actually say
The size on your sidewall is a specification, and each field of it means one thing.
- 175
- Section width, 175 millimetres. The tyre's width at its widest point when it is mounted and inflated — sidewall bulge included, not the tread. In inches that is 6.89″.
- 70
- Aspect ratio, 70%. The sidewall is 70% as tall as the tyre is wide, so 175 × 70 ÷ 100 = 122.5 mm. A lower number is a shorter sidewall and a stiffer ride.
- R13
- Radial construction, 13-inch rim. The R is the carcass type, not a size. The 13 is the wheel diameter the tyre beads onto — 330.2 mm — and it is the one dimension of the three that is still in inches.
The load index and speed symbol that follow the size — the 91V part — are a separate code. Read the rest of the sidewall →
Full dimensions
| Overall diameter | 575.2 mm | 22.65″ |
|---|---|---|
| Sidewall height | 122.5 mm | 4.82″ |
| Section width | 175 mm | 6.89″ |
| Rim diameter | 13″ | 330.2 mm |
| Rolling circumference | 1807 mm | 1.807 m |
| Revolutions per kilometre | 553.4 | 890.6 per mile |
| Ride height contribution | 287.6 mm | hub centre to ground, unloaded |
SOURCE·Metric size geometry + UN ECE R39 speedometer tolerance·computed from the 175/70R13 designation — no catalogue, no measurement, no vintage·REVIEWED ETRTO STANDARD
What else fits where a 175/70R13 does
Every size within reach of 575 mm, closest first, judged against the ±3% convention.
| Alternative | Diameter | Change | Verdict | Speedo at 100 |
|---|---|---|---|---|
| 165/75R13 | 578 mm | +0.43% | Within tolerance | 100.4 km/h true |
| 185/65R13 | 571 mm | −0.78% | Within tolerance | 99.2 km/h true |
| 155/80R13 | 578 mm | +0.52% | Within tolerance | 100.5 km/h true |
| 205/60R13 | 576 mm | +0.17% | Within tolerance | 100.2 km/h true |
| 185/60R14 | 578 mm | +0.42% | Within tolerance | 100.4 km/h true |
| 195/65R13 | 584 mm | +1.48% | Within tolerance | 101.5 km/h true |
| 175/65R14 | 583 mm | +1.37% | Within tolerance | 101.4 km/h true |
| 165/65R14 | 570 mm | −0.89% | Within tolerance | 99.1 km/h true |
Ranked by how close each one holds the original rolling diameter — which is the only thing this table can rank on. Whether any of them clears your arches, suits your rim width or carries your car's load is decided by the placard on your door pillar, not by this list.
What each one does to the speedometer
Assuming the car was calibrated for 175/70R13 and you fit the alternative instead. Indicated 100 km/h in every row.
| Fitted instead | Diameter change | Speedo shows 100 | True speed | Reads |
|---|---|---|---|---|
| 165/75R13 | +0.43% | 100 km/h | 100.4 km/h | low — you are faster than shown |
| 185/65R13 | −0.78% | 100 km/h | 99.2 km/h | high — you are slower than shown |
| 155/80R13 | +0.52% | 100 km/h | 100.5 km/h | low — you are faster than shown |
Reading low is the direction with no legal tolerance in it. Why that is, and what the rule says where you live →
175/70R13 — the questions that follow
What is the overall diameter of a 175/70R13 tyre?
575 mm, or 22.65″. That is the 13-inch rim (330.2 mm) plus two sidewalls of 122.5 mm each — one above the wheel centre and one below.
How tall is the sidewall on a 175/70R13?
122.5 mm. The 70 in the size is a percentage, not a measurement: the sidewall is 70% of the 175 mm section width, so 175 × 70 ÷ 100 = 122.5 mm.
What can I fit instead of a 175/70R13?
The closest alternatives on rolling diameter are 165/75R13 (+0.43%), 185/65R13 (−0.78%), 155/80R13 (+0.52%). Anything within ±3% of 575 mm keeps the speedometer and stability systems inside the band they were calibrated for — but arch clearance, rim width and load rating are separate questions that a size string cannot answer.
How many times does a 175/70R13 turn in a kilometre?
553 revolutions per kilometre, or 891 per mile. Its rolling circumference is 1.807 m, which is what the speedometer and the ABS both count against.
Neighbouring sizes on a 13-inch rim
The geometry here is exact; whether a tyre fits YOUR car is not something geometry can answer. Arch clearance, suspension travel, offset, load rating and your vehicle's own placard all decide that, and none of them are in a size string. The ±3% rule quoted throughout is an industry convention, not a law. Confirm any change against the tyre placard on your door pillar and with a tyre fitter before you buy.