Part of the data ring
TireFit
Size sheet · one designationOutside the usual envelope

325/25R15
tyre size, drawn to scale

The dimensions

Size elevation 325/25R15 · SCALE 1:3
OVERALL Ø 544 mm / 21.40″ RIM 15″ = 381.0 mm SECTION 325 MM / 12.80″ SIDEWALL 81 mm 25% OF 325 MM 325/25R15

SOURCE·Metric size geometry + UN ECE R39 speedometer tolerance·drawn to scale from the size designation — 1 px = 2.87 mm·REVIEWED ETRTO STANDARD

544 mm A 325/25R15 stands 544 mm — 21.40″ — from the ground to the top of the tread, on a sidewall of 81.3 mm.

Every one of those figures comes out of the designation itself: 325 mm across, a sidewall 25% of that, beaded onto a 15-inch wheel. It turns 586 times per kilometre, which is the number your speedometer and ABS are really counting.

Overall diameter
544mm · 21.40″
Sidewall height
81.3mm
Section width
325mm · 12.80″
Revolutions / km
586· 943/mi

How the figures are derived

  1. Read the size as the specification it is: section width in millimetres, aspect ratio as a percentage of that width, rim diameter in inches.
  2. Sidewall height = width × aspect ÷ 100. This is the number the size string is really about, and it is the one nobody quotes.
  3. Overall diameter = rim × 25.4 + two sidewalls — one at the top of the wheel and one at the bottom.
  4. Circumference = π × overall diameter, which gives revolutions per kilometre and per mile directly.
  5. Nothing above is measured, estimated, averaged or dated. It is the definition of the designation, so it does not go stale and it has no source to cite beyond the standard itself.
sidewall (mm) = width × aspect ÷ 100
overall diameter (mm) = rim × 25.4 + 2 × sidewall
speedo true speed = indicated × (new diameter ÷ old diameter)

The full method, the ±3% rule, and what geometry cannot tell you →

What the three numbers actually say

The size on your sidewall is a specification, and each field of it means one thing.

325
Section width, 325 millimetres. The tyre's width at its widest point when it is mounted and inflated — sidewall bulge included, not the tread. In inches that is 12.80″.
25
Aspect ratio, 25%. The sidewall is 25% as tall as the tyre is wide, so 325 × 25 ÷ 100 = 81.3 mm. A lower number is a shorter sidewall and a stiffer ride.
R15
Radial construction, 15-inch rim. The R is the carcass type, not a size. The 15 is the wheel diameter the tyre beads onto — 381.0 mm — and it is the one dimension of the three that is still in inches.

The load index and speed symbol that follow the size — the 91V part — are a separate code. Read the rest of the sidewall →

Full dimensions

Overall diameter543.5 mm21.40″
Sidewall height81.3 mm3.20″
Section width325 mm12.80″
Rim diameter15″381.0 mm
Rolling circumference1707 mm1.707 m
Revolutions per kilometre585.7942.5 per mile
Ride height contribution271.8 mmhub centre to ground, unloaded

SOURCE·Metric size geometry + UN ECE R39 speedometer tolerance·computed from the 325/25R15 designation — no catalogue, no measurement, no vintage·REVIEWED ETRTO STANDARD

325/25R15 — the questions that follow

What is the overall diameter of a 325/25R15 tyre?

544 mm, or 21.40″. That is the 15-inch rim (381.0 mm) plus two sidewalls of 81.3 mm each — one above the wheel centre and one below.

How tall is the sidewall on a 325/25R15?

81.3 mm. The 25 in the size is a percentage, not a measurement: the sidewall is 25% of the 325 mm section width, so 325 × 25 ÷ 100 = 81.3 mm.

What can I fit instead of a 325/25R15?

This size sits at the edge of the conventional fitment envelope, so there are no close alternatives inside the ±3% band on this rim. Check your vehicle's tyre placard before considering anything wider or taller.

How many times does a 325/25R15 turn in a kilometre?

586 revolutions per kilometre, or 943 per mile. Its rolling circumference is 1.707 m, which is what the speedometer and the ABS both count against.

The geometry here is exact; whether a tyre fits YOUR car is not something geometry can answer. Arch clearance, suspension travel, offset, load rating and your vehicle's own placard all decide that, and none of them are in a size string. The ±3% rule quoted throughout is an industry convention, not a law. Confirm any change against the tyre placard on your door pillar and with a tyre fitter before you buy.

See all 10 sites in this family, with what each one answers

Published by

Amit Sharma

Auckland real-estate agent and marketer. Builds free, sourced data tools.